Control temperature and moisture levels wirelessly and get the most value for your grain.
Due to problems in storage conditions, it is during grain storage that the greatest losses occur.
With GESCASER measurement systems, monitoring and controlling the temperature and humidity of the cereal, you will save time and costs.
Pass quality audits thanks to total control of your stored cereal.


Wireless javelin
- It measures temperature and moisture.
- Length and number of sensors can be customized on demand.
- No connections required.
- Made with fiberglass and stainless steel tip.
- Compatible with all Gescaser systems.
- Easy to insert and store inside the grain due to its flexible material and its diameter of 8mm.
Warehouses monitoring options

Multiple wireless measuring probes can be placed and moved anywhere in your warehouse. They transmit temperature data to the electronic receiver box.
The electronic boxes are scalable to cover all necessary areas.
The electronic receiver box can transfer all gathered data to your control room over RS485 wired connection or it can also transfer data wirelessly.
Quick measuring spear
One probe can also be used to make a quick measurement to a sample of products.
Automatic ventilation
It allows the automatic control of fans and exhaust roof fans related to each silo according to the environmental conditions and the stored cereal.
For more information on ventilation see the Safe storage section.

Anti-condensation probe
It measures the relative humidity and the air temperature between the cereal and the silo ceiling. It controls the starting and stoppage of the exhaust roof fans, avoiding condensation on the walls and the silo ceiling.

Weather station
It measures the relative humidity and the outdoor air temperature. It allows the fans to turn on automatically only when environmental conditions are favourable to ventilate.

Relay module
It is composed by free tension contacts where fans are connected for a better start up and/or automatic stoppage according to selected parameters. It can also be used as an alarm signal to import into your PLC/SCADA.
Control center
It shows the temperature of the grain according to the characteristics of each installation.
Integration for raw material storage
CTC+ can work with any production process that allows any of the following protocols: OPC or Modbus

