Obtain maximum market value of your grain by preserving it under perfect temperature and moisture conditions.
It is during grain storage that quality losses may occur, due to poor storage conditions.
With Gescaser monitoring systems, you will save time and money by controlling the temperature and moisture of your stored cereal.
Pass quality audits of your stored grain thanks to a total control of your stored cereal with Gescaser system.
Monitoring system components
Hardware to monitor temperature and moisture of the stored cereal.
Temperature and moisture probe
Probe of a smooth, flexible and small-diameter tube with sensors that measure both temperature and moisture of the cereal. With no sensor limitations and distributed at the client’s needs.
Electronic boxes are normally placed in the centre of the silo and are easily accessible from the footbridge. Easy to connect and replace, they facilitate any kind of repair.
It allows the automatic control of fans and exhaust roof fans related to each silo according to the environmental conditions and the stored cereal.
For more information on ventilation see the Safe storage section.
It measures the relative humidity and the air temperature between the cereal and the silo ceiling. It controls the starting and stoppage of the exhaust roof fans, avoiding condensation on the walls and the silo ceiling.
It measures the relative humidity and the outdoor air temperature. It allows the fans to turn on automatically only when environmental conditions are favourable to ventilate.
It is composed by free tension contacts where fans are connected for a better start up and/or automatic stoppage according to selected parameters. It can also be used as an alarm signal to import into your PLC/SCADA.
It shows the temperature of the grain according to the characteristics of each installation.
Integration for raw material storage
CTC+ can work with any production process that allows any of the following protocols: OPC or Modbus